Choose chicken-coop lighting by its job, permitted location and control requirements before comparing brightness. The Globe Kurt is a replaceable-bulb option for compatible sheltered positions; Lithonia FMLWL is a protected linear service-light format. Sunco VT DU is conditional because its current manual conflicts with wet-rated marketing and excludes timing devices. BarnGuard and HYPERLITE AP are exterior area lights. None is a complete lighting program for laying hens, and no selected fixture has been tested by this site in a coop.
We may earn a commission when you buy through links on this page.
Our picks at a glance
Start with the features that fit your setup.
Replaceable-bulb fixture for a compatible sheltered position
Globe Electric Kurt 44677 Ceiling Light

A replaceable bulb separates the lamp choice from the fixture, but neither the open shade nor indoor/outdoor wording grants unrestricted exposure.
- Lighting role
- Open-shade ceiling fixture
- Selected format
- 11 in matte-black Kurt
Exterior access-area light with a dusk-to-dawn photocell
Lithonia BarnGuard BGS P1 40K

This is an outdoor area-light option, not a recommendation to illuminate the birds’ sleeping space all night.
- Lighting role
- Exterior area/access lighting
- Selected format
- P1 4000K selected version
Also in this guide
- Lithonia FMLWL 48 840 LED WraparoundProtected service-area format; control restrictions apply
- Sunco VT DU Selectable Vapor-Tight FixtureConditional enclosed linear option; resolve conflicting location language
- HYPERLITE AP03 Gooseneck Area LightExterior gooseneck format with documented photocell selection
Lighting roles compared
| Product | Lighting role | Selected format | Supply | Decisive limitation |
|---|---|---|---|---|
| Lithonia FMLWL 48 840 LED Wraparound | Linear service illumination | 4 ft, 4000K standard FMLWL | 120V hardwired | Damp location; electronic switching restricted |
| Sunco VT DU Selectable Vapor-Tight Fixture | Enclosed linear service light | 4 ft, selectable output and CCT | 120–277V under current maker sheet | Manual excludes timing devices; wet/damp conflict |
| Globe Electric Kurt 44677 Ceiling Light | Open-shade ceiling fixture | 11 in matte-black Kurt | 120V; one E26 A19 bulb, sold separately | Maker lists dry and damp locations, not wet |
| Lithonia BarnGuard BGS P1 40K | Exterior area/access lighting | P1 4000K selected version | 120V under exact P1 table | Photocell schedule is not a flock-lighting program |
| HYPERLITE AP03 Gooseneck Area Light | Exterior wall-mounted area light | 12 in bronze selected AP03 offer | 120–277V under maker AP manual | Photocell selectable under exact instructions |
Service and exterior lighting options

01 / Protected service-area format; control restrictions apply
Lithonia FMLWL 48 840 LED Wraparound
Best for: A compatible protected service position where the exact standard fixture instructions and proposed controls can be satisfied.
- Lighting role
- Linear service illumination
- Selected format
- 4 ft, 4000K standard FMLWL
Why consider it
- Exact standard model has current maker documentation.
- Linear diffuser offers a different service-light format.
- No separate bulb to select for this integrated LED fixture.
Keep in mind
- Standard selected model is not the MVOLT dimming version.
- Installation guide restricts electronic controls.
- Damp-location suitability does not establish coop-wide suitability.
Read the full analysis of Lithonia FMLWL 48 840 LED Wraparound
The selected FMLWL 48 840 is a four-foot linear LED wraparound in the standard 120V family. Its current contractor sheet identifies the 4000K model. The broad diffuser is a different physical format from the open-shade Globe fixture, but the photograph does not establish usable illumination in a particular building.
The exact offer-linked installation guide says not to use a dimming circuit and restricts dimmers, motion or occupancy sensors, and other electronic switching unless otherwise designated. Do not borrow the 0–10V dimming or wider supply range of the FMLWL ZT MVOLT variants. A timer cannot simply be added to the shopping list without checking the actual control and instructions.
The manufacturer identifies damp-location use, not unrestricted wet, washdown or agricultural-chemical exposure. We also found different wattage figures in older and current literature and do not use an unresolved wattage comparison to rank it. Confirm the delivered label and applicable instructions with the installer before choosing this as a service light.
Key specs: Selected FMLWL 48 840 standard LED wraparound, 4 ft, 4000K, 120V. Damp-location model; no dimming circuit under linked instructions. Confirm the exact supplied revision and controls.

02 / Conditional enclosed linear option; resolve conflicting location language
Sunco VT DU Selectable Vapor-Tight Fixture
Best for: A service-light project only after Sunco resolves the applicable location rating and the proposed switching arrangement meets the exact supplied instructions.
- Lighting role
- Enclosed linear service light
- Selected format
- 4 ft, selectable output and CCT
Why consider it
- Current maker sheet identifies the selectable settings.
- Enclosed linear format differs from an open shade.
- Supply and control conditions can be checked before ordering.
Keep in mind
- Current manual expressly excludes timing devices and sensors.
- Wet-rated page conflicts with manual’s damp/no-direct-water language.
- Manual table says 65/75/90W versus maker sheet’s 38/46/54W; confirm supplied model.
Read the full analysis of Sunco VT DU Selectable Vapor-Tight Fixture
The selected one-pack VT DU offer is a four-foot enclosed LED fixture. The current maker sheet lists selectable 38/46/54W and 3500/4000/5000K settings with a 120–277V supply. However, the current manual’s VT_DU-WH-3550K specification table gives 65/75/90W, and a retail feature bullet gives another set. The figures in this comparison are attributed to the maker sheet; confirm the exact supplied model and applicable documentation rather than treating the conflicting manual table as resolved.
The more important purchase condition is in Sunco’s current manual. It excludes photo controls, occupancy sensors, third-party sensors and timing devices, and says it is not compatible with all dimmers. A selectable-output or 0–10V specification does not override those restrictions. This is not our default recommendation for an automated supplemental-light program.
The product page and specification use wet-rated language, while the current manual says damp locations and no direct water. We have not resolved that conflict with the manufacturer. Treat this as conditional: obtain applicable instructions and confirmation before ordering for an exposed position. The enclosure and clips shown in the photograph are not evidence of chemical resistance, washdown permission or suitability for combustible dust.
Key specs: Selected VT DU-WH-3550K, one 4 ft fixture. Current maker sheet: 38/46/54W, 3500/4000/5000K, 120–277V; current manual table instead gives 65/75/90W. Confirm supplied model, wet/damp conditions and control restrictions before purchase.

03 / Replaceable-bulb fixture for a compatible sheltered position
Globe Electric Kurt 44677 Ceiling Light
Best for: A sheltered ceiling position meeting the maker’s dry/damp conditions, with an appropriately specified bulb and compatible complete installation.
- Lighting role
- Open-shade ceiling fixture
- Selected format
- 11 in matte-black Kurt
Why consider it
- Maker identifies the exact Kurt model and bulb base.
- Replaceable bulb can be chosen within applicable fixture limits.
- Dry/damp location distinction is explicit.
Keep in mind
- Bulb is sold separately.
- Open shade is not an enclosed or wet-location design.
- Retail color field conflicts with the selected one-fixture identity.
Read the full analysis of Globe Electric Kurt 44677 Ceiling Light
Globe’s current Kurt page identifies SKU 44677, an approximately 11-inch matte-black ceiling fixture with a white inner shade. It uses one E26 A19 bulb, sold separately, with a maximum 60W bulb rating. That maximum is a fixture limit, not a recommendation to install a 60W lamp or proof of the light level needed by a flock.
The maker lists dry and damp locations. Its indoor/outdoor marketing should therefore be read as conditional on the actual permitted placement; it does not make this open-shade fixture a wet-location or enclosed agricultural light. The photographed decorative bulb illustrates the shape and is not evidence that a bulb arrives in the box.
The selected retail title and count describe one fixture, while a color field says Brooklyn 3 Pack. We follow the exact Kurt model and maker identity and advise confirming the selected package. We did not resolve a model-specific control manual, so no timer, smart-bulb or dimmer compatibility is assumed. Select the bulb, fixture and control as one documented arrangement.
Key specs: Globe Electric Kurt SKU 44677; approximately 11 in ceiling fixture; matte-black shade with white interior; 120V; one E26 A19 bulb sold separately, maximum 60W. Maker dry/damp locations.

04 / Exterior access-area light with a dusk-to-dawn photocell
Lithonia BarnGuard BGS P1 40K
Best for: A compatible exterior access-area project where the photocell behavior, light spill and mounting arrangement have been assessed.
- Lighting role
- Exterior area/access lighting
- Selected format
- P1 4000K selected version
Why consider it
- Current maker table identifies the exact P1 version.
- Built-in photocell suits a distinct exterior-control task.
- Different role from the protected linear service fixtures.
Keep in mind
- Dusk-to-dawn behavior is not a laying-hen program.
- P2 and MVOLT specifications must not be transferred.
- Exterior light spill and installation need site-specific assessment.
Read the full analysis of Lithonia BarnGuard BGS P1 40K
The selected BarnGuard code is BGS P1 40K 120 PE DDB. The current maker table lists the P1 version at 4000K, 4000 lumens and 120V with a photocell. Those specifications belong to this selected code; the P2 SWW2 MVOLT family members have other output, color and supply options.
The useful role here is exterior access and service-area lighting. A dusk-to-dawn photocell follows surrounding light conditions rather than a laying-hen program. Do not mount it inside an occupied sleeping compartment merely because the listing includes barn in its name or advertises automatic operation.
Resolve the actual mounting surface, electrical installation and where the light will fall. The maker’s output specification does not prove that an entrance is evenly illuminated or that the roost remains unaffected. We did not measure light spill or test predator deterrence, and the product should not be bought on either assumed result.
Key specs: Selected BGS P1 40K 120 PE DDB; current maker P1 table: 4000 lumens, 4000K, 120V, photocell. Outdoor area-light role; no interior overnight-light recommendation.

05 / Exterior gooseneck format with documented photocell selection
HYPERLITE AP03 Gooseneck Area Light
Best for: A compatible exterior access-light project after the delivered AP revision, mounting and control settings are confirmed with the maker or installer.
- Lighting role
- Exterior wall-mounted area light
- Selected format
- 12 in bronze selected AP03 offer
Why consider it
- Linked AP manual shows actual photocell selection.
- Selectable settings are documented rather than inferred.
- Gooseneck format differs from the compact BarnGuard area light.
Keep in mind
- Professional installation is specified.
- Confirm exact delivered AP revision and control compatibility.
- Retail and maker output figures differ; no lumen ranking.
Read the full analysis of HYPERLITE AP03 Gooseneck Area Light
The selected AP03 retail offer is a bronze gooseneck area-light format. The current HYPERLITE gooseneck page and its linked AP manual show 30/40/50W selection, 3000/4000/5000K options and a photocell on/off selection. The manual identifies a 120–277V supply and professional installation.
That documented photocell selection distinguishes it from assuming that every dusk-to-dawn fixture can be turned into any desired control arrangement. It still does not prove compatibility with an unspecified timer or smart switch. Confirm the exact delivered AP revision and complete control plan rather than using the instructions for a different HYPERLITE area-light family.
The retail output claim differs from the current product page, so we do not publish a lumen ranking for this offer. Its broad shade and exterior mounting role may suit an access-area design, but no photometric, spill-light or weather-exposure test was performed by this site. It remains an exterior option, not an automatic interior lighting program.
Key specs: Selected HYPERLITE AP03 bronze 12 in gooseneck offer. Maker-linked AP manual: 120–277V, selectable 30/40/50W and 3000/4000/5000K, photocell on/off selection. Confirm delivered revision.
How we chose
We matched five exact public Amazon offers to manufacturer model information, linked instructions and main product photographs. They represent four brands and different physical or control arrangements. We excluded heat lamps, unsupported generic solar-light claims and attempts to turn a human access light into a proven egg-production system.
The available offers do not support a single unrestricted best-overall pick for every occupied poultry building. Instead, the comparison identifies the job each format could address and the conditions that can rule it out. Dry/damp location language, a current control prohibition or an unresolved document conflict matters more than a long retail feature list.
We read the current Sunco manual, exact FMLWL installation guide, current BarnGuard specification and HYPERLITE AP instructions. The Sunco manual expressly excludes timing devices and specified sensors. FMLWL standard and ZT MVOLT variants are kept separate. The Globe maker page establishes the fixture and bulb requirements, but we did not resolve an exact product control manual for it.
The selected public pages exposed order controls when checked. Package contents, supplied revisions and availability may change. We did not install these fixtures, measure light levels or flicker, test weather exposure, compare electricity costs, verify a timer combination or observe any change in laying. No photograph of a clean fixture establishes those results.
How to choose chicken coop lighting
Name the lighting job first
Write down whether you need to see an entrance, inspect equipment during care, illuminate a service compartment or implement a separately established flock-lighting plan. Those are different decisions. An exterior photocell can be convenient for an access area while being inappropriate for the birds’ sleeping space.
Keep the intended illuminated area on the plan. For example, a doorway outside the coop and an interior roost may be close together but should not automatically receive the same light schedule. Resolve where the light falls rather than labeling the whole property as one lighting zone.
Separate a fixture purchase from a flock-lighting program
University of Minnesota Extension’s cold-weather poultry guidance discusses supplemental light as a management decision connected with laying. It also addresses the transition to darkness. That does not make every lamp or automated control appropriate for every flock.
This comparison supplies no universal daily-hours prescription, age-specific program or guaranteed laying result. Establish the care objective with suitable flock-specific guidance, then have the fixture and controls checked against it. A dusk-to-dawn label describes the device’s response to surrounding light, not its suitability for that objective.
Read permitted exposure before indoor/outdoor marketing
The Globe Kurt maker page lists dry and damp locations. That is more useful than interpreting outdoor as permission for any rain-exposed mounting. A sheltered position still has to meet the actual instructions and the complete installation’s requirements.
Sunco presents a more serious document conflict: wet-rated marketing alongside a current manual limiting use to damp locations and prohibiting direct water. Do not settle the contradiction by choosing whichever phrase is convenient. Obtain applicable confirmation from Sunco before buying for an exposed position; if it remains unresolved, choose another documented arrangement.
None of these ordinary lighting offers establishes unrestricted suitability for agricultural chemicals, washdown, heavy dust or a hazardous location. If those conditions are relevant, describe them to a qualified installer and the manufacturer. A plastic cover or metal shade does not answer the question by itself.
Verify controls for the exact fixture
The Sunco VT DU page links the current instructions. Those instructions exclude timing devices, photo controls, occupancy sensors and third-party sensors, and state that not all dimmers are compatible. A selectable-wattage control inside the fixture is not permission to attach an external timer.
The standard FMLWL installation guide likewise restricts electronic switching and prohibits a dimming circuit. Its standard 120V model cannot inherit the dimming features of a different family member. For either product, an existing automation plan may be the reason to reject the offer before ordering it.
HYPERLITE’s AP manual shows an actual photocell on/off selection. That is a documented feature, but it does not approve any unrelated external control. Give the installer the precise fixture code, applicable instructions and proposed controller instead of asking only whether an LED light can use a timer.
Treat lumens, color and watts as different information
Lumens describe a published light-output specification; watts describe electrical input; the Kelvin value identifies a color-temperature specification. None alone tells you the illumination reaching an entrance, service surface or occupied part of the building. Placement, distribution and the actual environment still matter.
We have not converted advertised lumens into a fixture-per-coop rule or a per-bird capacity. We also do not call a particular color temperature healthier or more productive based on its number. The Sunco and AP selectable settings are product choices to be assessed within the plan, not a recommendation to select the highest setting.
Include bulb selection and maintenance access
The Globe fixture needs a separately purchased bulb within the maker’s applicable requirements. The other selected offers are integrated LED formats. Compare the complete purchase and service arrangement: fixture, compatible lamp where needed, control, electrical installation and access for the prescribed care.
The maximum bulb wattage on a fixture is a limit, not a target. Nor does a decorative bulb shown in a retail picture establish package contents or suitability for the location. Confirm what the exact offer supplies and keep the product instructions available for the caregiver and installer.
A practical lighting purchase worksheet
Start with a short description such as exterior entrance visibility during routine visits or protected service-area illumination. Add a sketch showing the mounting position, entrance, occupied compartment and roost. This makes unwanted light reaching another area a concrete question before a fixture is installed.
Record the actual exposure at that position, including rain, condensation, dust and cleaning arrangements. Compare each condition with the applicable product instructions. Leave an unresolved rating or variant field visibly unresolved instead of treating it as approved because the body resembles another fixture.
Write the exact product code and supply requirement next to the proposed control. Ask the installer to confirm the complete arrangement, including the mounting and electrical work. This guide provides no wiring sequence, circuit modification or method for defeating a photocell.
For a dusk-to-dawn product, state whether that response is actually wanted at the access area. Do not select it merely to avoid thinking about the schedule. The interior housing plan should not acquire overnight illumination as an accidental consequence of an exterior-light purchase.
Before accepting the job as finished, compare the installed result with the original task through the applicable professional handover and product instructions. Keep those instructions, exact model information and a clear care contact available. This worksheet does not replace electrical inspection, establish a flock-lighting program or certify the illumination achieved.
FAQ
What is the best light for inside a chicken coop?
There is no unrestricted winner among these offers. Choose the actual lighting task and a fixture whose location and control instructions match the site. The standard FMLWL has important switching restrictions; the Globe Kurt needs a separate suitable bulb and compatible sheltered position. Neither is automatically approved throughout an occupied poultry building.
Can I put any LED coop light on a timer?
No. The current Sunco VT DU manual expressly excludes timing devices and specified sensors. The selected standard FMLWL instructions also restrict electronic switching. Verify the exact fixture, controller and supplied instructions together; an LED label or selectable wattage does not establish timer compatibility.
Is a dusk-to-dawn barn light suitable for laying hens?
Its photocell describes an exterior-control behavior, not an appropriate flock-lighting program. BarnGuard and HYPERLITE AP are compared here for exterior access-area roles. Do not use a product name or photocell feature to justify illuminating the birds’ sleeping space throughout the night.
Does vapor-tight mean a fixture can be washed down?
Do not assume so. The selected Sunco offer has wet-rated marketing, but its current manual says damp locations and no direct water. That conflict needs manufacturer resolution. No selected fixture is treated here as independently proven for washdown, agricultural chemicals or every dusty poultry location.
Will adding a brighter light increase egg production?
This comparison does not establish an egg-production result. Fixture output and a flock-lighting plan are different questions. Use appropriate management guidance for the flock and a documented electrical arrangement; do not turn the highest lumen figure, color setting or continuous illumination into a universal care recommendation.
Make the control and location match before ordering
Choose the role first, then verify the exact model, exposure and complete control arrangement. Reject an offer when its instructions conflict with the intended job, and resolve document discrepancies before installation. That is a firmer basis for a lighting purchase than an untested claim that one bright fixture fits every coop.
Featured product image from the exact Globe Electric via Amazon listing. It depicts one selected package, not a test or certification by this site.
